• Makes attaching to the anchorage structure simple, fast and easy for added worker satisfaction and productivity.
• Versatile size range fits many beams and securely attaches your personal fall arrest system to the structure offering maximum strength and durability. Other sizes are available in both sliding and fixed beam anchors.
• Anchor effortlessly slides across the beam following you as you work, and can be used overhead or at your feet for added versatility.
• With an overall 5,000 lb. (22kN) strength and a 420 lb. (189kg) user capacity, the device provides a strong and safe connection and offers additional tool carrying flexibility.
• Quality materials and construction offer maximum durability to stand-up to the toughest environments, providing added longevity.
• With dual clamp adjustment and the D-ring fixed to the middle of the load bar, it allows you to perfectly center the device on the beam for smooth operation.
• Synthetic wear pads reduce friction between the anchor and the I-beam, allowing smooth effortless operation.
• Simply depress locking tab on either beam clamp and slide to fit snug against beam for fast and easy adjustment.
• Unique system protects the anchor from accidental disengagement. In addition, the locking tab is located on the side instead of the top reducing change of it being kicked or forced open by the user’s lanyard.
• Unique shock absorbing lanyard can be used for up to a 12 ft. (3.7m) free fall, ideal when there is no overhead anchorage and your only option is to tie-off at your feet.

Sliding beam anchor fits 3-1/2 in. to 14 in. wide I-beams (9-35.5cm) up to 1-1/4″ thick (3.2cm).

DBI Sala Anchorage Connectors connectors are built from top quality materials guaranteeing high strength and durability to stand up to the toughest environments. Anchorage connectors are the unsung heroes of most fall protection systems, often overlooked but critical components because they securely attach your system to the anchorage. Your choice of anchor depends on the type of work being done. Anchorages are sold by what they connect to (general/all purpose, steel, concrete, roof or specialty), whether they are fixed or mobile, and whether they are permanent or portable. They all must provide a secure point of attachment for a complete personal fall arrest system, and must be capable of supporting a load of 5,000 lbs. (22kN) or of meeting OSHA’s criteria of a 2-to-1 safety factor.

• Durable polyester construction
• 3 ft. (0.9m) pass-thru type tie-off adapter
• Abrasion resistant polyester wear pad
• High strength steel hardware
• Compact and lightweight design

3 ft. (0.9m) web tie-off adapter, pass-thru type.

DBI Sala Anchorage Connectors are built from top quality materials guaranteeing high strength and durability to stand up to the toughest environments. Anchorage connectors are the unsung heroes of most fall protection systems, often overlooked but critical components because they securely attach your system to the anchorage. Your choice of anchor depends on the type of work being done. Anchorages are sold by what they connect to (general/all purpose, steel, concrete, roof or specialty), whether they are fixed or mobile, and whether they are permanent or portable. They all must provide a secure point of attachment for a complete personal fall arrest system, and must be capable of supporting a load of 5,000 lbs. (22kN) or of meeting OSHA’s criteria of a 2-to-1 safety factor.

• Extremely rugged and corrosion resistant
• Installs onto 3 in. to 8 in. wide I-beam flange (7.6-20.3cm) up to 11/16″ thick (1.7cm).
• Complete hands-free horizontal mobility
• Ideal for use with self retracting lifeline
• Easy to use dual adjustment dials
• High strength steel construction
• Rotating D-ring tie-off point is fixed in center
• Double-shielded wheel bearings
• Built-in guards protect wheels

Trolley fits 3 in. to 8 in. wide I-beams (7.6-20.3cm) up to 11/16″ thick (1.7cm).

DBI Sala Anchorage Connectors are built from top quality materials guaranteeing high strength and durability to stand up to the toughest environments. Anchorage connectors are the unsung heroes of most fall protection systems, often overlooked but critical components because they securely attach your system to the anchorage. Your choice of anchor depends on the type of work being done. Anchorages are sold by what they connect to (general/all purpose, steel, concrete, roof or specialty), whether they are fixed or mobile, and whether they are permanent or portable. They all must provide a secure point of attachment for a complete personal fall arrest system, and must be capable of supporting a load of 5,000 lbs. (22kN) or of meeting OSHA’s criteria of a 2-to-1 safety factor.

• Versatile choice to securely attach one component to another and offers maximum strength and durability. Many different sizes are available to suit specific jobsite requirements.
• Double-action mechanism automatically closes and locks to keep all components of your safety system firmly attached.
• Zinc plating offers maximum corrosion resistance to stand-up to the toughest environments, providing added longevity.
• With an overall 5,000 lb. (22kN) strength and 3,600 lb. (16kN) gates, our hooks provide strong, fast and safe connections
• Simple operation even while wearing gloves makes connecting components of your fall protection system together fast and easy for added worker satisfaction and productivity.

11/16 in. (17.5mm) gate opening steel carabiner with self closing/locking gate.

DBI Sala Anchorage Connectors are built from top quality materials guaranteeing high strength and durability to stand up to the toughest environments. Anchorage connectors are the unsung heroes of most fall protection systems, often overlooked but critical components because they securely attach your system to the anchorage. Your choice of anchor depends on the type of work being done. Anchorages are sold by what they connect to (general/all purpose, steel, concrete, roof or specialty), whether they are fixed or mobile, and whether they are permanent or portable. They all must provide a secure point of attachment for a complete personal fall arrest system, and must be capable of supporting a load of 5,000 lbs. (22kN) or of meeting OSHA’s criteria of a 2-to-1 safety factor.

• Compact and lightweight design
• High strength steel and aluminum construction
• Extremely rugged and corrosion resistant
• Installs onto 2-1/2 in. to 12 in. wide I-beam flange (6.3-30.5cm) up to 1-1/2″ thick (3.8cm).
• Attach in any orientation or direction
• Swiveling D-ring tie-off point
• Detent style attachment with built-in tightening handle

Fixed beam anchor fits 2-1/2 in. to 12 in. wide I-beams (6.3-30.5cm) up to 1-1/2″ thick (3.8cm).

DBI Sala Anchorage Connectors are built from top quality materials guaranteeing high strength and durability to stand up to the toughest environments. Anchorage connectors are the unsung heroes of most fall protection systems, often overlooked but critical components because they securely attach your system to the anchorage. Your choice of anchor depends on the type of work being done. Anchorages are sold by what they connect to (general/all purpose, steel, concrete, roof or specialty), whether they are fixed or mobile, and whether they are permanent or portable. They all must provide a secure point of attachment for a complete personal fall arrest system, and must be capable of supporting a load of 5,000 lbs. (22kN) or of meeting OSHA’s criteria of a 2-to-1 safety factor.

• A built-in D-ring provides a compatible connection for your fall protection system and swivels keeping your connecting component in-line at all times.
• The anchor can be used in multiple click here orientations for added jobsite versatility and flexibility.
• Makes installing into concrete simple, fast and easy for added worker satisfaction and productivity.
• Installation is simple and efficient, taking just seconds utilizing standard concrete tools.
• Very cost effective device is built to last, allowing it to be left in place permanently or used as a portable anchorage system.
• Re-install in a new location with the re-usable D-ring assembly and a new bolt for added jobsite flexibility and lower overall cost of ownership.
• A red torque indicator cap shears off reveling a green hex-head to notify the user the anchor has been installed properly.
• With an overall 5,000 lb. (22kN) strength and a 420 lb. (190kg) user capacity, the device provides a strong and safe connection.
• Plated steel materials and no moving or fragile parts to foul-up offers maximum durability to stand-up to the toughest environments, providing added longevity.

Concrete D-ring anchor for 11/16 in., 18 mm or 3/4 in. hole with swiveling D-ring.

DBI Sala Anchorage Connectors are built from top quality materials guaranteeing high strength and durability to stand up to the toughest environments. Anchorage connectors are the unsung heroes of most fall protection systems, often overlooked but critical components because they securely attach your system to the anchorage. Your choice of anchor depends on the type of work being done. Anchorages are sold by what they connect to (general/all purpose, steel, concrete, roof or specialty), whether they are fixed or mobile, and whether they are permanent or portable. They all must provide a secure point of attachment for a complete personal fall arrest system, and must be capable of supporting a load of 5,000 lbs. (22kN) or of meeting OSHA’s criteria of a 2-to-1 safety factor.

• Unique system provides a fall protection anchor where its often impossible to use traditional types such as tops of airplanes, tanks, railcars, etc.
• System offers added freedom of movement and placement of system versus very restrictive restraint type systems.
• No separate pumps, vacuum hoses or other components are necessary to power the system for ultimate flexibility.
• System can be used with on-board compressed gas bottle or a large capacity detached bottle, or shop air for versatility.
• The complete system is under 20 lbs. (9.1 kg) making it easy to move from one location to another, set-up and store.
• Incorporates both types of alarms to notify the user if the system has lost its air power source or safe vacuum levels.
• In the event the power source is cut or lost, the system will prevent immediate vacuum loss so user can remedy the situation.
• For added flexibility, one system can power another which is ideal if you want to configure a horizontal lifeline system between two anchors.
• Create a continuous anchor point for added safety and mobility for two workers by simply connecting a horizontal lifeline between two or more Vacuum Anchor Pads.
• Lightweight and extremely rugged case with both hand-held and roller type handles makes transporting and storing the device fast and easy.
• Specialized EPDM construction won’t breakdown in harsh environments, it will fasten safely and securely without maring or damaging the work surface.
• Designed for safe operation in areas with dangerous concentrations of flammable gasses or dust for complete safety and peace of mind.

Mobi-Lok™ aviation industry self contained vacuum anchor system with attachment for air bottle and carrying case.

With a Vacuum Anchor System at your workers’ side, they can anchor to virtually any smooth, non-porous surface simply by flipping a switch and waiting for the green light. So whether they need to replace a broken strobe atop a jumbo jetliner or perform routine maintenance, they’ll always be able to quickly, and easily put themselves where they need to be—without putting themselves in danger. Our anchorage connectors are built from top quality materials guaranteeing high strength and durability to stand up to the toughest environments. Anchorage connectors are the unsung heroes of most fall protection systems, often overlooked but critical components because they securely attach your system to the anchorage. Your choice of anchor depends on the type of work being done. Anchorages are sold by what they connect to (general/all purpose, steel, concrete, roof or specialty), whether they are fixed or mobile, and whether they are permanent or portable. They all must provide a secure point of attachment for a complete personal fall arrest system, and must be capable of supporting a load of 5,000 lbs. (22kN) or of meeting OSHA’s criteria of a 2-to-1 safety factor.

• Swiveling D-ring tie-off point
• Installs into 3/4 in. (19mm) concrete hole
• Use vertically in wall or horizontally in ceiling
• Portable and reusable
• Compact and lightweight design
• High strength steel and aluminum construction
• Rugged and corrosion resistant materials
• Exclusive easy grip trigger and quick release plug
• Shielded load and chock release cables

Concrete wedge anchor for 3/4 in. (19mm) hole with swiveling D-ring.

DBI Sala Anchorage Connectors are built from top quality materials guaranteeing high strength and durability to stand up to the toughest environments. Anchorage connectors are the unsung heroes of most fall protection systems, often overlooked but critical components because they securely attach your system to the anchorage. Your choice of anchor depends on the type of work being done. Anchorages are sold by what they connect to (general/all purpose, steel, concrete, roof or specialty), whether they are fixed or mobile, and whether they are permanent or portable. They all must provide a secure point of attachment for a complete personal fall arrest system, and must be capable of supporting a load of 5,000 lbs. (22kN) or of meeting OSHA’s criteria of a 2-to-1 safety factor.

• A built-in D-ring provides a compatible connection for your fall protection system and swivels keeping your connecting component in-line at all times.
• Device can be removed and simply re-installed in a new location for added jobsite flexibility and lower overall cost of ownership.
• Provides a quick, easy and safe tie-off point for your fall protection system.
• Installation is simple and efficient, taking just seconds utilizing standard tools.
• The anchor must be installed overhead, it is available in different lengths for added jobsite versatility and flexibility.
• Makes installing simple, fast and easy for added worker satisfaction and productivity.
• With an overall 5,000 lb. (22kN) strength and a 420 lb. (190 kg) user capacity, the device provides a strong and safe connection.
• Quality construction with coated and stainless steel materials offer maximum durability to stand-up to the toughest environments, providing added longevity.
• Protects against damage caused by rubbing against the substrate for a longer service life.

10 ft. (3.0 m) drop-thru anchor with swiveling D-ring for concrete and steel, fits 1-1/2 in. to 1-3/4 in. dia. hole (38.1 to 44.5 mm) with a minimum thickness of 4 in. (101.6 mm).

DBI Sala Anchorage Connectors are built from top quality materials guaranteeing high strength and durability to stand up to the toughest environments. Anchorage connectors are the unsung heroes of most fall protection systems, often overlooked but critical components because they securely attach your system to the anchorage. Your choice of anchor depends on the type of work being done. Anchorages are sold by what they connect to (general/all purpose, steel, concrete, roof or specialty), whether they are fixed or mobile, and whether they are permanent or portable. They all must provide a secure point of attachment for a complete personal fall arrest system, and must be capable of supporting a load of 5,000 lbs. (22kN) or of meeting OSHA’s criteria of a 2-to-1 safety factor.

• Extremely rugged and corrosion resistant
• High strength steel construction
• Bolt or weld to structure for fall arrest anchor point
• Compact 1/4″ x 2″ x 4-1/2″ (6 x 51 x 114 mm) 304 stainless steel plate
• Pre-drilled 1/2″ (12.7mm) holes
• Zinc plated steel D-ring for compatible tie-off point

D-ring anchorage plate with zinc plated steel D-ring and 304 stainless steel plate.

DBI Sala Anchorage Connectors are built from top quality materials guaranteeing high strength and durability to stand up to the toughest environments. Anchorage connectors are the unsung heroes of most fall protection systems, often overlooked but critical components because they securely attach your system to the anchorage. Your choice of anchor depends on the type of work being done. Anchorages are sold by what they connect to (general/all purpose, steel, concrete, roof or specialty), whether they are fixed or mobile, and whether they are permanent or portable. They all must provide a secure point of attachment for a complete personal fall arrest system, and must be capable of supporting a load of 5,000 lbs. (22kN) or of meeting OSHA’s criteria of a 2-to-1 safety factor.